Micro Stepper Motor Lead Screw Linear Actuator Tr3.5x4 For Beauty Equipment
A micro stepper motor with a lead screw is often used to create a linear actuator. It provides precise and controlled linear motion by converting the rotary motion of the stepper motor into linear motion through the lead screw mechanism.
1.Load Capacity: The 0.5kg load capacity refers to the maximum weight that the linear actuator can effectively move or hold. It indicates the maximum force the actuator can exert without compromising its performance. Make sure to consider the load requirements of your specific application to ensure the actuator can handle it.
2.Speed (600pps): The speed of 600pps indicates the maximum pulse rate at which the stepper motor can rotate. Each pulse corresponds to a step, and the speed is measured in steps per second. The actual linear speed of the actuator will depend on the lead screw pitch and the specific configuration of the system.
3.NEMA 8 Stepper Motor: NEMA (National Electrical Manufacturers Association) is a standard that defines the physical dimensions and mounting requirements for stepper motors. The NEMA 8 designation specifies the size and mounting dimensions of the motor. NEMA 8 motors are compact and typically have a smaller frame size and lower torque compared to larger NEMA sizes.
Features:
-
Bipolar or unipolar versions available
-
Hybrid stepper construction
-
Available in single or double shaft versions
-
CE and RoHS approved
-
Customizations on request
Motor Specifications
| Step Angel | 1.8 ° |
| Fram Size | 20mm |
| Number of Phase | 2 Phase |
| Rated Current | 0.24Amp |
| Holding Torque | 0.5kg at 600pps |
| Resistance | 11.5ohm |
| Inductance | 3.50mH |
| Rotor Inertia | 6g-cm² |
| Motor weight | 0.2kg |
| Lead | 35mm |
| Connection | Bipolar |
Operating Specifications
Step Angle: 1.8°
Maximum Temperature :80°C maximum
Ambient Temperature: -20 °C to 50°C
Storage Temperature -20: °C to 100°C
Humidity Range (%) :85% or less, non-condensing
Magnet Wire Insulation :Class B 130 deg C
Insulation Resistance :100M Ohm at 500 VDC
Dielectric Strength :500 VDC for 1 min
Shaft Radial Play:0.02Max. (450g-load)
Shaft Axial Play:0.08Max. (450g-load)
Max. radial force:28N (20mm from the flange)
Max. axial force):10N
Torque Curves
Submodels
| Model | Holding Torque | Step Angle | Motor Length | Type of Shaft | Rated Current |
| 42SHD4950 | 0.13N.m | 1.8° | 20mm | D Shaft-20mm | 1.0A |
| 42SHD4003 | 0.26N.m | 1.8° | 34mm | D Shaft-20mm | 0.4A |
| 42SHD0261 | 0.45N.m | 1.8° | 40mm | D Shaft-20mm | 1.68A |
| 42SHD4425 | 0.59N.m | 1.8° | 48mm | D Shaft-24mm | 2.0A |
| 42SHD4813 | 0.8N.m | 1.8° | 60mm | D Shaft-24mm | 2.1A |
| Body Length | Diameter of Screw | Pitch | Length of Screw |
20 mm
34 mm
40 mm
48 mm
60 mm
| 5 | 2 | 20-1000 mm |
| 8 |
| 6.35 | 1.27 |
| 3.175 |
| 6.35 |
| 6.5 | 3 |
| 6.35 |
| 8 | 1 |
| 2 |
| 4 |
| 8 |
| 12 |
Download
If our standard motor cannot meet your needs,
we can customize the motor according to your needs
Customized content includes but is not limited to special shafts, winding parameters, installation dimensions, lead wires with special requirements, connectors, etc.
Options:
Encoder | Brake | Gearbox | Shaft
Please click the "Get a quote" button below to tell us your requirements.
Product Tags:
|
|
0.24Amp Micro Stepper Motor Lead Screw Linear Actuator Tr3.5x4 For Beauty Equipment Images
|
